Title: Influence of mesh density on calculated extreme stresses in aortic aneurysms
Authors: Man, Vojtěch
Polzer, Stanislav
Burša, Jiří
Citation: Applied and Computational Mechanics. 2016, vol. 10, no. 2, p. 97-110.
Issue Date: 2016
Publisher: University of West Bohemia
Document type: článek
URI: http://hdl.handle.net/11025/22412
ISSN: 1802-680X (Print)
2336-1182 (Online)
Keywords: aneurysma břišní aorty;metoda konečných prvků;stres;hustota sítě
Keywords in different language: abdominal aortic aneurysm;finite element method;stress;mesh density
Abstract: The paper deals with evaluation of the influence of finite element mesh density on the resulting extreme stresses in models of abdominal aortic aneurysms. In most patient-specific computationalmodels published recently, a free mesh of tetrahedrons is used and any information on density of the applied mesh is often missing. In this study a comparison of differentmesh densities has been realized with four patient-specificmodel geometries, all based on a numerical reconstruction of the unloaded geometry of the aneurysm, and with two different Yeoh-type constitutive models. It has been shown that resulting maximumstresses are not mesh independent; due to a better description of the stress gradient in the critical location, the maximum wall stress increases with increasing number of elements throughout the wall thickness, especially in models without residual stresses. This effect is more pronouncedwhen using Vande Geest constitutive model with higher strain stiffening than for Raghavan-Vorp material parameters. Although the mesh density requirements were not so high when the stress gradient was reduced by taking residual stresses into consideration, even in this case low numbers of elements throughout the wall thickness may givemesh dependent results. Although for a rigorous recommendation of the mesh density more analyses are needed, it was shown that the time consuming procedure of taking residual stresses into consideration cannot be replaced by a simpler model with rough mesh.
Rights: © 2016 University of West Bohemia. All rights reserved.
Appears in Collections:Volume 10, number 2 (2016)
Volume 10, number 2 (2016)

Files in This Item:
File Description SizeFormat 
Man.pdfPlný text1,48 MBAdobe PDFView/Open

Please use this identifier to cite or link to this item: http://hdl.handle.net/11025/22412

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.