Články / Articles (KEE) Domovská stránka kolekce Zobrazit statistiky

Procházet
Přihlásit se k zasílání denních e-mailů o novinkách RSS Feed RSS Feed RSS Feed
Záznamy kolekce (řazeno podle Datum zaslání v sestupně pořadí): 1 až 20 z 22
Zemčík, Hana , Kroupa, Tomáš , Vaňková, Tereza , Zemčík, Robert , Pihera, Josef , Prosr, Pavel , Kadlec, Petr , Šroubová, Lenka , Müllerová, Eva , Martínek, Petr , Pavlica, Richard , Komárek, Josef , Friedl, Jan , Polanský, Radek
Hybrid steel–composite cross-arm for distribution power lines

This paper describes the development of electrically insulating hybrid steel–composite cross-arm for mediumvoltage overhead distribution power lines with three conductors. The main goal was to achieve substantial weight savings ompared to a common steel cross-arm with three ceramic insulators widely&#...

Abushamah, Hussein Abdulkareem Sale , Burian, Ondřej , Škoda, Radek
Design and Operation Optimization of a Nuclear Heat-Driven District Cooling System

Carbon-free thermally driven district cooling systems (DCS) can effectively mitigate the excessive electricity consumption and carbon emissions associated with the cooling sector. This study proposes a DCS that employs nuclear heat as the primary energy source. The system comprises three main...

Bělík, Milan , Rubanenko, Olena
Implementation of Digital Twin for Increasing Efficiency of Renewable Energy Sources

This paper presents an analysis of the instability of the electricity generation of renewable energy sources (RESs), specifically Digital Twins of RESs. The first part deals with the analysis of RES electricity generation around the world and Ukraine. The following chapter describes fea...

Lovecký, Martin , Závorka, Jiří , Jiřičková, Jana , Ondráček, Z. , Škoda, Radek
Fixed neutron absorbers for improved nuclear safety and better economics in nuclear fuel storage, transport and disposal

Current designs of both large reactor units and small modular reactors utilize a nuclear fuel with increasing enrichment. This increasing demand for better nuclear fuel utilization is a challenge for nuclear fuel handling facilities. The operation with higher enriched fuels leads to red...

Peltan, Tomáš , Vilímová, Eva , Czakoj, Tomáš , Matěj, Zdeněk , Mravec, Filip , Cvachovec, František , Šimon, Jan , Juříček, Vlastimil , Košťál, Michal
Characterisation of neutron field in large graphite insertion in special core of the LR-0 reactor

Graphite is important reactor material used as a neutron moderator in various reactor designs. It is not only structural material used in previous reactors design but even material to which attention is focused due to the very high-temperature reactor design, which uses graphite as...

Závorka, Jiří , Lovecký, Martin , Jiřičková, Jana , Škoda, Radek
Experimental verification of new neutron absorbers concepts

The presented paper describes experimental verification of the fixed neutron absorber for VVER-1000 fuel assemblies in the LR-0 zero-power reactor. This research determines the critical state parameters for fuel without these absorbers and for fuel with designed absorbers dedicated to the ba...

Bělík, Milan , Rubanenko, Olena
Optimisation of passive solar systems seasonal operation in conditions of central Europe

The paper deals with optimisation of passive solar systems installed on family and office buildings in central Europe locations. In these territories, in contrast to more southern countries, it is not typical to utilize passive solar systems on public or private buildings. Although ...

Bělík, Milan , Rubanenko, Olena
Determination PV Module Technical Condition

The paper focuses on the determination of technical conditions and degradation of photovoltaic modules installed in grid-on operated photovoltaic systems in Ukraine and the Czech Republic. Detected malfunctions of PV modules are classified and Fault Tree Analyses (FTA) is created for particu...

Bělík, Milan
Optimisation of energy accumulation for renewable energy sources

This project focuses on optimisation of energy accumulation for various types of distributed renewable energy sources. The main goal is lo prepare charging - discharging strategy depending on actual power consumption and prediction of consumption and production of utilised renewable energy s...

Vilímová, Eva , Peltan, Tomáš , Jiřičková, Jana
Possible implementation of Ex-core measurement in TEPLATOR graphite reflector

An ex-core neutron flux measurement is a crucial system for all common power reactors. It is necessary to monitor the neutron flux and control the chain reaction, therefore the ex-core neutron flux measurement is one of the main safety and control systems. The main advantage&#...

Abushamah, Hussein Abdulkareem Sale , Mašata, David , Müller, Michael , Škoda, Radek
Economics of reusing spent nuclear fuel by Teplator for district heating applications

The Teplator is a nuclear heat-only reactor under development in the Czech Republic, which uses already irradiated spent nuclear fuel (SNF). This study aims to assess the feasibility of integrating this technology with district heating systems (DHSs) compared with other heating technologies....

Síťař, Vladislav , Vysloužil, Tomáš , Raková, Lenka , Hruška, Tomáš
The power load model for electric vehicle charging modelling and its utilisation for voltage level studies and cables ampacity in distribution grid

When electrical energy is drawn by electric vehicles from charging stations at charging process the voltage drops and increased current loading of cable lines in distribution grid occur. Inasmuch the electrical grid is insufficiently dimensioned or at large amount electric vehicles concurren...

Kurzweil, Peter , Schell, Christian , Haller, Rainer , Trnka, Pavel , Hornak, Jaroslav
Environmental impact and aging properties of natural and synthetic transformer oils under electrical stress conditions

Against the background of environmental compatibility and unrestricted technical usability, synthetic, and natural transformer oils are critically compared in long-term tests under high voltage using electrical and instrumental analytical methods. Synthetic alkyl esters of pentaerythrol appear to be sustai...

Abushamah, Hussein Abdulkareem Sale , Haghifam, Mahmoudreza , Bolandi, T. Ghanizadeh
A novel approach for distributed generation expansion planning considering its added value compared with centralized generation expansion

Technological progress of distributed generation (DG) units, global approach to reduce the pollution emissions, and creating the opportunity for local investors to participate in the generation expansion investment, are some of the important reasons to involve the DG as an alternative option...

Hájek, Jiří , Rot, David , Čubrová, Jana , Jiřinec, Jakub
Induction annealing of austenitic spring steels for nuclear reactors

This article aims to explain the mechanism of heat transfer between melt and cold crucible (CC) in processes referred to as induction skull melting (ISM). Several experiments were performed for this purpose. In these experiments, all relevant electrical and mechanical quantities that af...

Rot, David , Hrbek, Jan , Jiřinec, Jakub
Heat transfer in induction melting of aluminum oxide in cold crucible

This paper presents a research study detailing the procedure and results of experimental eye-tracking research to evaluate employers' career websites. The objective of this research was to gain an insight into Generation Y's perspective on the career websites of prospective employers....

Knedlík, Michal , Rot, David , Hrbek, Jan
Manipulation system for measuring heat flux in radioactive melt

This paper describes designing and experimental trials of an induction annealing method for AISI 321H austenitic steel wires. Specifically, it explores the feasibility of incorporating an existing frequency controller into a wire drawing line to provide induction heating of the wire stock&#x...

Olkhovskiy, Mikhail , Müllerová, Eva , Martínek, Petr
Impulse signals classification using one dimensional convolutional neural network

The main purpose of this work is to propose a modern one-dimensional convolutional neural network (1 D CNN) configurations for distinguishing separate PD impulses from different types of PD sources while the parameters of these sources are changed. Three PD sources were built for&#...

Sprinzl, Daniel , Krýsl, V. , Mikoláš, Pavel , Závorka, Jiří , Tímr, Jan , Bilodid, Y. , Temesvári, Emese , Pós, István , Kalinin, Yu P. , Shcherenko, Anastasia I. , Aleshin, Sergey S. , Bahadir, Tamer
"Full-Core" VVER-1000 calculation benchmark

This work deals with the “Full-Core” VVER-1000 calculation benchmark which was proposed on the 26th Symposium of AER [1]. Recently, the calculation benchmarks “Full-Core” VVER-440 [2] and its extension [3] have been introduced in the AER community with positive response [4, 5]. Therefor...

Závorka, Jiří , Svobodová, Miroslava , Mikoláš, Pavel , Vimpel, Jan , Sprinzl, Daniel , Lovecký, Martin
Solution of full-core VVER-440 PK-3+calculation benchmark by serpent

This work deals with the updated reference solution of the Full-Core VVER-440 PK-3+ benchmark which is based on the extended calculation benchmark from 2018. [1] The modification consists of a new type of fuel assembly with PK-3 design in the loading pattern. The main aim ...

Záznamy kolekce (řazeno podle Datum zaslání v sestupně pořadí): 1 až 20 z 22