Název: On fatigue life predictions for notched members by the nominal stress-based and the local strain-based methods
Autoři: Rodriguez Duran, Jorge Alberto
Citace zdrojového dokumentu: Applied and Computational Mechanics. 2022, vol. 16, no. 1, p. 23-34.
Datum vydání: 2022
Nakladatel: University of West Bohemia
Typ dokumentu: článek
article
URI: https://www.kme.zcu.cz/acm/acm/issue/view/31
http://hdl.handle.net/11025/49230
ISSN: 1802-680X (Print)
2336-1182 (Online)
Klíčová slova: přístup založený na únavovém namáhání;křivky deformace-životnost;elasticko-plastická analýza napětí-deformace
Klíčová slova v dalším jazyce: fatigue strain-based approach;strain-life curves;elastic-plastic stress-strain analysis
Abstrakt v dalším jazyce: Traditional engineeringmodels for addressing fatigue issues are based on empirical relations between the necessary number of cycles for fatigue failures $N_f$ and either, the nominal stress $\sigma_{an}$ or the local strain $\epsilon_a$ amplitudes. The aim of the present paper is to highlight the advantages of the local strain-based approach $\epsilon N$ for fatigue assessment of notched components over the more traditional stress-based approach $\sigma N$. Since a closed form solution for the ratio between fatigue life predictions among the two methods does not exist, we have considered a hypothetical case study that included variables such as the applied stress, the stress concentration factor and the structural material, and numerically calculated the expected fatigue life according to each approach. In order to highlight the differences related with the stress-strain analysis, the applied nominal stresses (uniaxial) were limited to the elastic region where both methods use approximately the same fatigue strength curve. Additionally a unique and equal function for accounting for themean stress effects was incorporated in both approaches. Fatigue life predictions are expressed in universal graphs of normalized stress versus the $N_f-ratio$, the latter parameter defined as the quotient between the $N_f$ predictions according to the $\sigma N$ and $\epsilon N$ approaches, considering the average values for a group of sixty structural steels at each load level. The results confirm that fatigue life predictions under the traditional stress based approach are conservative when compared to the strain based approach for all the possible scenarios described by the variables involved.
Práva: © University of West Bohemia
Vyskytuje se v kolekcích:Volume 16, number 1 (2022)
Volume 16, number 1 (2022)

Soubory připojené k záznamu:
Soubor Popis VelikostFormát 
678-4338-1-PB.pdfPlný text1,54 MBAdobe PDFZobrazit/otevřít


Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam: http://hdl.handle.net/11025/49230

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.