Full metadata record
DC FieldValueLanguage
dc.contributor.authorPrajzler, Václav
dc.contributor.authorStřílek, Eduard
dc.contributor.authorHüttel, Ivan
dc.contributor.authorŠpirková, Jarmila
dc.contributor.authorJurka, Vlastimil
dc.contributor.editorPihera, Josef
dc.contributor.editorSteiner, František
dc.date.accessioned2012-11-09T11:04:03Z
dc.date.available2012-11-09T11:04:03Z
dc.date.issued2011
dc.identifier.citationElectroscope. 2011, č. 4, EDS 2011.cs
dc.identifier.issn1802-4564
dc.identifier.urihttp://147.228.94.30/images/PDF/Rocnik2011/Cislo4_2011/r5c4c3.pdf
dc.identifier.urihttp://hdl.handle.net/11025/624
dc.format5 s.cs
dc.format.mimetypeapplication/pdf
dc.language.isoenen
dc.publisherZápadočeská univerzita v Plzni, Fakulta elektrotechnickács
dc.relation.ispartofseriesElectroscopecs
dc.rightsCopyright © 2007-2010 Electroscope. All Rights Reserved.en
dc.subjectpolymerové optické mikrokroužkové rezonátorycs
dc.titleDesign and modeling of the ENR polymer microring resonators add/drop filter for wavelength division multiplexingen
dc.typekonferenční příspěvekcs
dc.typeconferenceObjecten
dc.rights.accessopenAccessen
dc.type.versionpublishedVersionen
dc.description.abstract-translatedWe report about design, modeling, fabrication and properties of the polymer optical microring resonator. First step was to design single mode optical polymer ridge waveguides by using BeamPROPTM software and then optical polymer microring resonator was designed by using FullWAVETM software. The design of the single mode waveguides was done for the operating wavelengths 650 nm and 1550 nm. The design of the microring resonators was done for operating wavelength 1550 nm and for elimination wavelength 1490 nm. The resonator was designed on the bases of optical polymer waveguides Epoxy Novolak Resin deposited onto silica-on-silicon substrate. We used Polymethylmethacrylate as cover layers, or eventually, no cover layer was applied. Deposition tests of the designed structures were done by using standard photolithography process and electron lithography process. Surface qualities of the fabricated samples were checked using optical microscope (Olympus DX60) and waveguiding properties were examined by Metricon 2010 prism-coupler system.en
dc.subject.translatedpolymer optical microring resonatorsen
dc.type.statusPeer-revieweden
Appears in Collections:Číslo 4 - EDS 2011 (2011)
Číslo 4 - EDS 2011 (2011)

Files in This Item:
File Description SizeFormat 
r5c4c3.pdf432,82 kBAdobe PDFView/Open
Show simple item record


Please use this identifier to cite or link to this item: http://hdl.handle.net/11025/624

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

search
navigation
  1. DSpace at University of West Bohemia
  2. Publikace ZČU / UWB Publications
  3. Časopisy ZČU / UWB Journals
  4. Electroscope
  5. Ročník 2011
  6. Číslo 4 - EDS 2011 (2011)