Název: | Návrh metodiky voľby spojov v montážnom procese |
Autoři: | Václav, Štefan Benovič, Martin |
Citace zdrojového dokumentu: | Strojírenská technologie Plzeň 2011: sborník abstraktů: IV. ročník mezinárodní konference konané ve dnech 25.- 26.1.2011 v Plzni. Vyd. 1. Plzeň: ZČU v Plzni, 2011, s. [1-6]. ISBN 978-80-7043-934-0. |
Datum vydání: | 2011 |
Nakladatel: | Západočeská univerzita v Plzni. Fakulta strojní. Katedra technologie obrábění |
Typ dokumentu: | konferenční příspěvek conferenceObject |
URI: | http://hdl.handle.net/11025/16360 |
ISBN: | 978-80-7043-934-0 |
Klíčová slova: | výrobek;spoj;montáž;metodika |
Klíčová slova v dalším jazyce: | product;joint;construction;methodics |
Abstrakt v dalším jazyce: | In this paper we discussed the optimization of the product from view of assembly. We have determined the basic parameters of the product that affect the assembly process respectively its price. The basic parameters of the product are these: materials parameters, technological parameters, construction parameters. After examining the impact of the various parameters we were evaluated that technological parameters that are most flexible to use in the entire assembly process. Innovation through technological parameters can be implemented by: • choosing a suitable joining technology • unification of technologies • adding technological elements We address the choice of an appropriate assembly technology, we interpreted the choice of an appropriate service. The joint itself can be easily chosen according to design needs but it is not always an appropriate option for selected assembly system. If we follow in choosing the correct service must be informed with not only product design but also with the intention of assembly. Assembly is possible to describe by issues: What? How much? How? Where? In this paper we describe the exact nature of issues. Theoretical Basis of the joints were set by classification. After answering these questions and studied by the classification, we continued in the development methodology, which is solved by a flowchart. The methodology is designed to point a particular choice of the joint. This item is in the process methodology solutions. One possible criteria may also be orientation. The methodology in this form eliminates irrelevant options for addressing service. |
Práva: | © University of West Bohemia |
Vyskytuje se v kolekcích: | Strojírenská technologie - Plzeň 2011 sborník příspěvků Strojírenská technologie - Plzeň 2011 sborník příspěvků |
Soubory připojené k záznamu:
Soubor | Popis | Velikost | Formát | |
---|---|---|---|---|
Benovic.pdf | Plný text | 444,33 kB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/16360
Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.