Full metadata record
DC pole | Hodnota | Jazyk |
---|---|---|
dc.contributor.author | Pokorný, Peter | |
dc.contributor.author | Kubek, Andrej | |
dc.date.accessioned | 2015-10-08T09:15:41Z | |
dc.date.available | 2015-10-08T09:15:41Z | |
dc.date.issued | 2011 | |
dc.identifier.citation | Strojírenská technologie Plzeň 2011: sborník abstraktů: IV. ročník mezinárodní konference konané ve dnech 25.- 26.1.2011 v Plzni. Vyd. 1. Plzeň: ZČU v Plzni, 2011, s. [1-6]. ISBN 978-80-7043-934-0. | cs |
dc.identifier.isbn | 978-80-7043-934-0 | |
dc.identifier.uri | http://hdl.handle.net/11025/16378 | |
dc.description.abstract | CNC frézovanie je v súčasnosti jednou z najrozšírenejších technológii obrábania tvarových plôch, pretože ponúka veľmi vysokú mieru efektívnosti. Táto efektívnosť je okrem iného závislá aj na opotrebovaní nástrojov pri obrábaní. Tento článok sa zaoberá problematikou frézovania tvarových plôch prostredníctvom 5 – tich súvisle riadených osí CNC frézovačky. Je tu načrtnutá problematika opotrebovania nástrojov pri 5 – osovom frézovaní. V závere sú uvedené hlavné smery pokračovania výskumu v oblasti opotrebovania rezných nástrojov pri 5 – osovom frézovaní. | cs |
dc.format | 6 s. | cs |
dc.format.mimetype | application/pdf | |
dc.language.iso | sk | sk |
dc.publisher | Západočeská univerzita v Plzni. Fakulta strojní. Katedra technologie obrábění | cs |
dc.rights | © University of West Bohemia | en |
dc.subject | opotřebení | cs |
dc.subject | 5-osé frézovanie | cs |
dc.title | Problematika opotrebenia pri 5-osovom frézovaní | sk |
dc.title.alternative | Problems of wear in 5‐axis milling | en |
dc.type | konferenční příspěvek | cs |
dc.type | conferenceObject | en |
dc.rights.access | openAccess | en |
dc.type.version | publishedVersion | en |
dc.description.abstract-translated | CNC milling is currently one of the most used technology of FFS (free form surfaces) machining, because it guarantees high effectivness of production process and quality of workpieces. Current requirements on quality and production are pushing forward 5-axes machining centres, which have long range of advantages. Effectiveness of these systems is dependant, besides other things, on durability of tools. One way of enhancing tool durability is the metallurgy or by change of technological parameters. In my research I will be focusing on much less discussed topic which is possibility of lowering tool wear by choosing appropriate milling strategy. With 5-axes milling machines while considering finishing methods of machining we use milling with ball nose cutters and this particularly gives us options for further researching impact of choosing strategy of milling on wear of the tool. In this article I describe wear of tools and teoretical aspects of milling with ball nose cutter. | en |
dc.subject.translated | tool wear | en |
dc.subject.translated | 5‐axis milling | en |
dc.type.status | Peer-reviewed | en |
Vyskytuje se v kolekcích: | Strojírenská technologie - Plzeň 2011 sborník příspěvků Strojírenská technologie - Plzeň 2011 sborník příspěvků |
Soubory připojené k záznamu:
Soubor | Popis | Velikost | Formát | |
---|---|---|---|---|
Kubek.pdf | Plný text | 468,84 kB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/16378
Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.