Název:	Mechanical Properties and Fatigue Resistance of 3D Printed Inconel 718 in Comparison with Conventional Manufacture
Autoři:	Černý, Ivo Kec, Jan Vlasák, Tomáš Remar, Luboš Jersák, Miroslav Zetek, Miroslav
Citace zdrojového dokumentu:	ČERNÝ, I., KEC, J., VLASÁK, T., REMAR, L., JERSÁK, M., ZETEK, M. Mechanical Properties and Fatigue Resistance of 3D Printed Inconel 718 in Comparison with Conventional Manufacture. Key Engineering Materials, 2018, roč. 774, č. 2018, s. 313-318. ISSN 1662-9795.
Datum vydání:	2018
Nakladatel:	Trans Tech Publications
Typ dokumentu:	článek article
URI:	2-s2.0-85053023960 http://hdl.handle.net/11025/30915
ISSN:	1662-9795
Klíčová slova v dalším jazyce:	Direct Metal Laser Sintering;Inconel 718 alloy;microstructure;mechanical properties;fatigue durability;creep
Abstrakt v dalším jazyce:	The paper contains results of the first stage of experimental programme aimed at an evaluation of microstructure, mechanical properties, fatigue durability and creep of the first batch of Inconel 718 samples manufactured using the 3D printing technology, Direct Metal Laser-Sintering (DMLS). Specimens were printed in the X position with specimen axis perpendicular to the built direction. The results, compared with specimens manufactured conventionally, were completed and discussed with analyses of damage mechanisms particularly using scanning electron microscopy. Static strength of the printed material was significantly higher in comparison with conventional material. Fatigue resistance was comparable provided that there were no microstructure defects causing premature failure. High sensitivity to sever machining was demonstrated.
Práva:	Plný text je přístupný v rámci univerzity přihlášeným uživatelům. © Trans Tech Publications
Vyskytuje se v kolekcích:	Články / Articles (RTI) OBD

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.