| Název: | Influences of cutting process parameters on the cutting quality when water jet cutting |
| Autoři: | Zetková, Ivana Jeníček, Štěpán Hronek, Ondřej Kotěšovec, Vratislav Vrtáček, Jiří Zetek, Miroslav |
| Citace zdrojového dokumentu: | ZETKOVÁ JENÍČEK, Š., HRONEK, O., KOTĚŠOVEC, V., VRTÁČEK, J., ZETEK, M. Influences of cutting process parameters on the cutting quality when water jet cutting. In: Annals of DAAAM and Proceedings of the International DAAAM Symposium. Vídeň, Rakousko: DAAAM International Vienna, 2018. s. 1286-1292. ISBN 978-3-902734-20-4 , ISSN 1726-9679. |
| Datum vydání: | 2018 |
| Nakladatel: | DAAAM International Vienna |
| Typ dokumentu: | konferenční příspěvek conferenceObject |
| URI: | 2-s2.0-85060084654 http://hdl.handle.net/11025/31141 |
| ISBN: | 978-3-902734-20-4 |
| ISSN: | 1726-9679 |
| Klíčová slova v dalším jazyce: | water jet;cutting process;parameters change;quality of the cut |
| Abstrakt v dalším jazyce: | The article analyses unconventional technology of water jet cutting and its impact on the cutting quality. A series of experiments were done to determine the effects of the used materials and their cut thickness on the final surface integrity, within the experimental program. Steels 1.1191 (12 050 according to ČSN) and 1.2379 (19 573 according to ČSN) were used for the experiment. Steel 1.1191 was selected, because this material is a standard for the steels machinability. Steel 1.2379 was chosen, because it belongs to a group of materials, which are difficult to machine. Therefore, it is possible to compare the cut quality of two steels with different properties. Also it was cut into the samples of different thickness. Thicknesses were chosen to make it clear, how the abrasive beam will handle a thick or thin workpiece wall. This article, the study of the integrity machined surface by progressive AWJ technology contributed to the influence evaluation of the material thickness during water jet cutting. The corrections for the cutting optimization and their influences to the cutting process were used in the experiment. |
| Práva: | © DAAAM International Vienna |
| Vyskytuje se v kolekcích: | Konferenční příspěvky / Conference Papers (RTI) OBD |
Soubory připojené k záznamu:
| Soubor | Velikost | Formát | |
|---|---|---|---|
| INFLUENCES OF CUTTING PROCESS PARAMETERS ON THE CUTTING QUALITY WHEN WATER JET CUTTING.pdf | 1,09 MB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/31141Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.