| Název: | Comparison of iba & ifba type of burnable absorbers composed of two elements for evolutionary power reactor |
| Autoři: | Zeman, Michal Škoda, Radek |
| Citace zdrojového dokumentu: | ZEMAN, M., ŠKODA, R. Comparison of iba & ifba type of burnable absorbers composed of two elements for evolutionary power reactor. In: Proceedings of the 27th International Conference on Nuclear Engineering (ICONE27). New York: American Society of Mechanical Engineers (ASME), 2019. s. 1-7. ISBN 978-4-88898-305-1. |
| Datum vydání: | 2019 |
| Nakladatel: | American Society of Mechanical Engineers (ASME) |
| Typ dokumentu: | konferenční příspěvek conferenceObject |
| URI: | 2-s2.0-85071388508 http://hdl.handle.net/11025/36551 |
| ISBN: | 978-4-88898-305-1 |
| Klíčová slova v dalším jazyce: | burnable absorbers;depletion calculation;evolutionary power reactor;integral burnable absorber;integral fuel burnable absorber |
| Abstrakt v dalším jazyce: | Nowadays the study of absorbing materials and nuclear fuel is a very current topic. The research of burnable absorbers (sometimes called burnable poisons), control rods and soluble absorbers is very important. This paper describes the possibility of using a combination of materials as a burnable absorber and a different type of burnable absorbers (IBA/IFBA). Burnable absorber has a significant impact on regulation and control of the reactor. They serve in the reactor to compensate initial excess reactivity and thus it is possible to prolong the fuel cycle with higher enrichment of the fuel. In the first part of this paper, the burnable absorber composed of 2 elements is described and the best combination is selected based on the depletion calculations. The second part describes the use of IFBA, as well as the calculation with different layer thickness of burnable absorber. Then the obtained results are evaluated. Finally, the comparison between the results for IBA and IFBA is made and the most suitable solution for the EPR is chosen. |
| Práva: | Plný text je přístupný v rámci univerzity přihlášeným uživatelům. © ASME |
| Vyskytuje se v kolekcích: | Konferenční příspěvky / Conference papers (KEE) OBD |
Soubory připojené k záznamu:
| Soubor | Velikost | Formát | |
|---|---|---|---|
| ICONE27_Zeman_1626.pdf | 354,08 kB | Adobe PDF | Zobrazit/otevřít Vyžádat kopii |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/36551Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.