Full metadata record
DC poleHodnotaJazyk
dc.contributor.authorMichal, Ondřej
dc.contributor.authorMentlík, Václav
dc.date.accessioned2021-03-08T11:00:22Z-
dc.date.available2021-03-08T11:00:22Z-
dc.date.issued2020
dc.identifier.citationMICHAL, O. MENTLÍK, V. Area density of polyimide nanofibers and its influence on the properties of epoxy based nanodielectrics. In: Proceedings of the 2020 International Conference on Diagnostics in Electrical Engineering (Diagnostika) : CDEE 2020. Pilsen: University of West Bohemia in Pilsen, 2020. s. 10-13. ISBN 978-1-72815-879-2, ISSN 2464-7071.cs
dc.identifier.isbn978-1-72815-879-2
dc.identifier.issn2464-7071
dc.identifier.uri2-s2.0-85094811996
dc.identifier.urihttp://hdl.handle.net/11025/42820
dc.format4 s.cs
dc.format.mimetypeapplication/pdf
dc.language.isoenen
dc.publisherUniversity of West Bohemia in Pilsenen
dc.relation.ispartofseriesGETL - Proceedings of 2020en
dc.rightsPlný text je přístupný v rámci univerzity přihlášeným uživatelům.cs
dc.rights© University of West Bohemia in Pilsenen
dc.titleArea density of polyimide nanofibers and its influence on the properties of epoxy based nanodielectricsen
dc.typekonferenční příspěvekcs
dc.typeconferenceObjecten
dc.rights.accessrestrictedAccessen
dc.type.versionpublishedVersionen
dc.description.abstract-translatedRecent demands for thin and more resistant materials, that can be used in rotating machines, is causing the evolution of the new generations of materials. Conventional electroinsulating materials include a variety of composite materials, such as the combination of resin, mica and glass fiber cloths. Unfortunately, for effective usage of most composite materials, the thick layer must be used. This affects the space charge accumulation and also thermal conductivity. One of the means to partially eliminate this problem is to reduce the thickness of the entire insulating system. On the other hand, reducing the thickness comes with the reduction of electrical durability. In recent years, the nanocomponents are gaining popularity in various applications. This article presents the experiment of using a combination of commonly used epoxy resin and novel types of non-woven polymer nanofiber materials and modified silicon dioxide nanoparticles. In this experiment, the emphasis was given to the influence concerning the area density of the nanofibers on the electrical parameters of the composite specimen. Based on the results, the influence of the area density has been found. Also, the lower values of the area density have a slightly higher positive effect on the electrical parameters.en
dc.subject.translatednanoparticlesen
dc.subject.translatednanocompositesen
dc.subject.translatednanofibersen
dc.subject.translateddielectric propertiesen
dc.subject.translatedpolyimide nanofibersen
dc.subject.translatedarea densityen
dc.identifier.doi10.1109/Diagnostika49114.2020.9214599
dc.type.statusPeer-revieweden
dc.identifier.obd43930542
dc.project.IDLO1607/RICE-NETESIS - nové technologie a koncepce pro inteligentní průmyslové systémy (NETESIS)cs
dc.project.IDSGS-2018-016/Diagnostika a materiály v elektrotechnicecs
Vyskytuje se v kolekcích:Konferenční příspěvky / Conference papers (RICE)
Konferenční příspěvky / Conference Papers (KET)
OBD

Soubory připojené k záznamu:
Soubor VelikostFormát 
Michal_09214599.pdf2,22 MBAdobe PDFZobrazit/otevřít  Vyžádat kopii


Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam: http://hdl.handle.net/11025/42820

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.

hledání
navigace
  1. DSpace at University of West Bohemia
  2. Publikační činnost / Publications
  3. OBD