Název:	A Control System for Automated Evaluation and Tuning of ASIC Parameters
Autoři:	Hudec, Adam Ravasz, Richard Arbet, Daniel Stopjaková, Viera
Citace zdrojového dokumentu:	2021 International Conference on Applied Electronics: Pilsen, 7th – 8th September 2021, Czech Republic, p. 51-54.
Datum vydání:	2021
Nakladatel:	University of West Bohemia
Typ dokumentu:	konferenční příspěvek conferenceObject
URI:	http://hdl.handle.net/11025/45565
ISBN:	978–80–261–0972–3 (Print) 978–80–261–0973–0 (Online)
ISSN:	1803–7232 (Print) 1805–9597 (Online)
Klíčová slova:	počítačem řízené ladění;FDDA;mikrokontrolér;grafické uživatelské prostředí
Klíčová slova v dalším jazyce:	computer-controlled tuning;FDDA;microcontroller;graphical user interface
Abstrakt v dalším jazyce:	This paper deals with design of a control system for automated post-fabrication setting/tuning of ASIC parameters. A new computer application that easily and effectively measures and sets the functional parame ter values using graphical user interface (GUI) was devel oped. A non-standard communication protocol has been implemented on-chip, and the microcontroller (MCU) as a communication protocol converter was employed. Transformation of the substandard communication protocol into the standard one closes the communication channel between the computer and the Circuit Under Test (CUT). The whole control system was verified using a Field Programmable Gate Array (FPGA), MCU and a Logic analyzer.
Práva:	© University of West Bohemia, 2021
Vyskytuje se v kolekcích:	Applied Electronics 2021 Applied Electronics 2021

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.