Full metadata record
| DC pole | Hodnota | Jazyk |
|---|---|---|
| dc.contributor.author | Kůs, Václav | |
| dc.contributor.author | Skala, Bohumil | |
| dc.contributor.author | Drábek, Pavel | |
| dc.date.accessioned | 2021-12-06T11:00:26Z | - |
| dc.date.available | 2021-12-06T11:00:26Z | - |
| dc.date.issued | 2021 | |
| dc.identifier.citation | KŮS, V. SKALA, B. DRÁBEK, P. Complex design method of filtration station considering harmonic components. Energies, 2021, roč. 14, č. 18, s. 1-17. ISSN: 1996-1073 | cs |
| dc.identifier.issn | 1996-1073 | |
| dc.identifier.uri | 2-s2.0-85115291850 | |
| dc.identifier.uri | http://hdl.handle.net/11025/46285 | |
| dc.format | 17 s. | cs |
| dc.format.mimetype | application/pdf | |
| dc.language.iso | en | en |
| dc.publisher | MDPI | en |
| dc.relation.ispartofseries | Energies | en |
| dc.rights | © authors | en |
| dc.title | Complex design method of filtration station considering harmonic components | en |
| dc.type | článek | cs |
| dc.type | article | en |
| dc.rights.access | openAccess | en |
| dc.type.version | publishedVersion | en |
| dc.description.abstract-translated | The paper deals with a new methodology for calculating the filter parameters. The basis is respect for the fact that the real filter current consists of other harmonic components, which filter is tuned. The proposed methodology was used to design filters for traction substation 25 kV/50 Hz. The operation of the locomotives in the AC supply systems of 25 kV/50 Hz leads to a rising of higher order harmonic currents. Due to the 1-phase supply system, these are mainly the 3rd and 5th harmonics. By simulation and subsequent measurement of the proposed traction power station filters the proposed methodology was verified. Thus, the filter design can also be used for filter compensating stations of the standard 3-phase distribution network. The described method presents an optimal filter design without unnecessary oversizing. This fact reduces the size and cost of the filter. It is shown that it is possible to design a filter that meets the requirements for power quality under extreme load and to minimise distortion of line voltage. | en |
| dc.subject.translated | AC traction systems | en |
| dc.subject.translated | traction substation | en |
| dc.subject.translated | harmonics | en |
| dc.subject.translated | power harmonic filters | en |
| dc.subject.translated | total harmonic distortion | en |
| dc.identifier.doi | 10.3390/en14185872 | |
| dc.type.status | Peer-reviewed | en |
| dc.identifier.document-number | 699196300001 | |
| dc.identifier.obd | 43933945 | |
| dc.project.ID | EF18_069/0009855/Elektrotechnické technologie s vysokým podílem vestavěné inteligence | cs |
| dc.project.ID | SGS-2021-021/Výzkum a vývoj perspektivních technologií v elektrických pohonech a strojích IV | cs |
| Vyskytuje se v kolekcích: | Články / Articles (RICE) Články / Articles (KEV) OBD | |
Soubory připojené k záznamu:
| Soubor | Velikost | Formát | |
|---|---|---|---|
| Kus_energies-14-05872-v2-1.pdf | 1,94 MB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/46285Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.