Název: | Analysis of Defects Associated With Manufacturing Keys for Brass Musical Instruments |
Další názvy: | Analýza vad spojených s výrobou kláves pro žesťové hudební nástroje |
Autoři: | Bricín, David Odehnal, Josef Kříž, Antonín Špirit, Zbyněk |
Citace zdrojového dokumentu: | BRICÍN, D. ODEHNAL, J. KŘÍŽ, A. ŠPIRIT, Z. Analysis of Defects Associated With Manufacturing Keys for Brass Musical Instruments. Defect and Diffusion Forum, 2022, roč. 417, č. 2022, s. 95-100. ISSN: 1012-0386 |
Datum vydání: | 2022 |
Nakladatel: | Trans Tech Publications |
Typ dokumentu: | článek article |
URI: | 2-s2.0-85133698159 http://hdl.handle.net/11025/51342 |
ISSN: | 1012-0386 |
Klíčová slova: | gravitační lití;investiční lití;smršťovací pórovitost;povrchové vady |
Klíčová slova v dalším jazyce: | gravity casting;investment casting;shrinkage porosity;surface defects |
Abstrakt: | This article deals with the problematics of the production of small castings using gravitational investment casting. These are castings with a relatively complex shape, which are used as parts of trigger assembly for musical wind instruments. During their production, various defects occur which are connected with the casting process. The aim of this article is to describe the defects and suggest possible methods for removing them. The first step was to find and identify these defects using metallographic and EDX microanalysis. Furthermore, a simulation calculation of the casting process was used to determine the influence of the casting geometry on casting quality. Based on these analyses, the most suitable alloy and casting system geometry were proposed for the production of the casting. |
Abstrakt v dalším jazyce: | This article deals with the problematics of the production of small castings using gravitational investment casting. These are castings with a relatively complex shape, which are used as parts of trigger assembly for musical wind instruments. During their production, various defects occur which are connected with the casting process. The aim of this article is to describe the defects and suggest possible methods for removing them. The first step was to find and identify these defects using metallographic and EDX microanalysis. Furthermore, a simulation calculation of the casting process was used to determine the influence of the casting geometry on casting quality. Based on these analyses, the most suitable alloy and casting system geometry were proposed for the production of the casting. |
Práva: | Plný text není přístupný. © Trans Tech Publications |
Vyskytuje se v kolekcích: | Články / Articles (KMM) OBD |
Soubory připojené k záznamu:
Soubor | Velikost | Formát | |
---|---|---|---|
DDF.417.95 (1) (4).pdf | 902,36 kB | Adobe PDF | Zobrazit/otevřít Vyžádat kopii |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/51342
Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.