Název:	Design and modeling of the ENR polymer microring resonators add/drop filter for wavelength division multiplexing
Autoři:	Prajzler, Václav Střílek, Eduard Hüttel, Ivan Špirková, Jarmila Jurka, Vlastimil
Citace zdrojového dokumentu:	Electroscope. 2011, č. 4, EDS 2011.
Datum vydání:	2011
Nakladatel:	Západočeská univerzita v Plzni, Fakulta elektrotechnická
Typ dokumentu:	konferenční příspěvek conferenceObject
URI:	http://147.228.94.30/images/PDF/Rocnik2011/Cislo4_2011/r5c4c3.pdf http://hdl.handle.net/11025/624
ISSN:	1802-4564
Klíčová slova:	polymerové optické mikrokroužkové rezonátory
Klíčová slova v dalším jazyce:	polymer optical microring resonators
Abstrakt v dalším jazyce:	We report about design, modeling, fabrication and properties of the polymer optical microring resonator. First step was to design single mode optical polymer ridge waveguides by using BeamPROPTM software and then optical polymer microring resonator was designed by using FullWAVETM software. The design of the single mode waveguides was done for the operating wavelengths 650 nm and 1550 nm. The design of the microring resonators was done for operating wavelength 1550 nm and for elimination wavelength 1490 nm. The resonator was designed on the bases of optical polymer waveguides Epoxy Novolak Resin deposited onto silica-on-silicon substrate. We used Polymethylmethacrylate as cover layers, or eventually, no cover layer was applied. Deposition tests of the designed structures were done by using standard photolithography process and electron lithography process. Surface qualities of the fabricated samples were checked using optical microscope (Olympus DX60) and waveguiding properties were examined by Metricon 2010 prism-coupler system.
Práva:	Copyright © 2007-2010 Electroscope. All Rights Reserved.
Vyskytuje se v kolekcích:	Číslo 4 - EDS 2011 (2011) Číslo 4 - EDS 2011 (2011)

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.