Full metadata record
DC pole | Hodnota | Jazyk |
---|---|---|
dc.contributor.advisor | Štěpánek, Ivo | |
dc.contributor.author | Sladká, Jana | |
dc.contributor.referee | Kaiser, Jaroslav | |
dc.date.accepted | 2012-08-27 | |
dc.date.accessioned | 2013-11-05T11:57:16Z | - |
dc.date.available | 2011-09-19 | cs |
dc.date.available | 2013-11-05T11:57:16Z | - |
dc.date.issued | 2012 | |
dc.date.submitted | 2012-06-28 | |
dc.identifier | 46545 | |
dc.identifier.uri | http://hdl.handle.net/11025/2631 | |
dc.description.abstract | Zaměření této práce bylo na optimalizaci metod měření tenkých vrstev na hodnocení rozvrstvených polymerních materiálů vlivem dlouhodobého působení vysoké teploty. Teplotní stárnutí bylo měřeno na vzorkách válcového tvaru z polymerů určených pro výrobu elektrických izolací. Byly vybrány 2 metody hodnocení: nanoindentace a rentgenová fluorescence. Rentgenová fluorescence byla pro první zachycení probíhajících změn a pro měření změn chemického složení na povrchu a v příčném řezu a nanoindentace byla pro zachycení změn v elasticko-plastickém chování a zpevnění povrchových vrstev. Experimentální práce ukázala, že pro aplikaci elektrických izolací v teplotně náročných podmínkách jsou vhodnější termoplasty (polyethylen). | cs |
dc.format | 60 s., 71 s. | cs |
dc.format.mimetype | application/pdf | |
dc.language.iso | cs | cs |
dc.publisher | Západočeská univerzita v Plzni | cs |
dc.relation.isreferencedby | https://portal.zcu.cz/StagPortletsJSR168/CleanUrl?urlid=prohlizeni-prace-detail&praceIdno=46545 | - |
dc.rights | Plný text práce je přístupný bez omezení. | cs |
dc.subject | Polymerní materiály | cs |
dc.subject | stárnutí polymerů | cs |
dc.subject | tepelná degradace | cs |
dc.subject | tenké vrstvy | cs |
dc.subject | měření tvrdosti | cs |
dc.subject | nanoindentace | cs |
dc.subject | rentgenová fluorescence | cs |
dc.subject | elasticko-plastické chování | cs |
dc.subject | zpevnění povrchových vrstev | cs |
dc.subject | depozice tenkých vrstev | cs |
dc.subject | modifikace povrchu | cs |
dc.subject | degradace povrchu | cs |
dc.title | Optimalizace indentačních měření pro hodnocení povrchových vrstev polymerních materiálů ovlivněných tepelným zatížením | cs |
dc.title.alternative | The optimalization of indent measurements for evaluation of surface layers of polymeric materials affected by thermal load | en |
dc.type | bakalářská práce | cs |
dc.thesis.degree-name | Bc. | cs |
dc.thesis.degree-level | Bakalářský | cs |
dc.thesis.degree-grantor | Západočeská univerzita v Plzni. Fakulta strojní | cs |
dc.description.department | Katedra materiálu a strojírenské metalurgie | cs |
dc.thesis.degree-program | Strojní inženýrství | cs |
dc.description.result | Obhájeno | cs |
dc.rights.access | openAccess | en |
dc.description.abstract-translated | The aim of the thesis is the optimalization of thin layers measuring method for rating of polymer materials that have been layered by long-time application in high temperature. Thermal Aging was measuered on cylinder shaped samples of polymers used for production of electric insulators. Two measurement methods were chosen: nanoindentation androentgen fluorescency. Roentgen fluorescency was chosen for the first capturing of ongoing changes and for measuring of changes of chemical composition of the surface and in transverse cut. Nanoindentation was used for capturing the changes in elasto-plastic properties and surface layers reinforcement. The experiments showed that thermoplastic materials (for example polyethylene) are better for application as electric insulators. | en |
dc.subject.translated | Polymer materials | en |
dc.subject.translated | thermal aging of polymer materials | en |
dc.subject.translated | thermal degradation | en |
dc.subject.translated | thin layers | en |
dc.subject.translated | measurement of hardness | en |
dc.subject.translated | nanoindentation | en |
dc.subject.translated | roentgen fluorescency | en |
dc.subject.translated | elasto-plastic properties | en |
dc.subject.translated | surface layers reinforcement | en |
dc.subject.translated | depozition of thin layers | en |
dc.subject.translated | modification of surface | en |
dc.subject.translated | degradation of surface | en |
Vyskytuje se v kolekcích: | Bakalářské práce / Bachelor´s works (KMM) |
Soubory připojené k záznamu:
Soubor | Popis | Velikost | Formát | |
---|---|---|---|---|
BP-Sladka_Jana.pdf | Plný text práce | 9,11 MB | Adobe PDF | Zobrazit/otevřít |
Hodnoceni_Sladka.tif | Posudek vedoucího práce | 175,94 kB | TIFF | Zobrazit/otevřít |
OP_Sladka.tif | Posudek oponenta práce | 190,68 kB | TIFF | Zobrazit/otevřít |
Prubeh_Sladka.tif | Průběh obhajoby práce | 56,59 kB | TIFF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/2631
Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.