Full metadata record
DC poleHodnotaJazyk
dc.contributor.authorJanoušek, Jaromír
dc.contributor.editorHořejší, Petr
dc.contributor.editorVaněk, Václav
dc.date.accessioned2019-04-25T07:47:09Z-
dc.date.available2019-04-25T07:47:09Z-
dc.date.issued2019
dc.identifier.citationHOŘEJŠÍ, Petr, ed.; VANĚK, Václav, ed. Soutěžní přehlídka studentských a doktorských prací FST 2019: sborník příspěvků: 25. dubna 2019. 1. vyd. Plzeň: Západočeská univerzita v Plzni, 2019, s. 145-150. ISBN 978-80-261-0860-3.cs
dc.identifier.isbn978-80-261-0860-3
dc.identifier.urihttp://hdl.handle.net/11025/34383
dc.format6 s.cs
dc.format.mimetypeapplication/pdf
dc.language.isoenen
dc.publisherZápadočeská univerzita v Plznics
dc.subjectekologicky podporované krakovánícs
dc.subjectkorozní praskánícs
dc.subjecthydrogenovaná páracs
dc.subjectoxidacecs
dc.titleEnvironmentally assisted cracking of 316L austenitic stainless steel in a hydrogenated steam environmenten
dc.typekonferenční příspěvekcs
dc.typeconferenceObjecten
dc.rights.accessopenAccessen
dc.type.versionpublishedVersionen
dc.description.abstract-translatedA low pressure superheated hydrogen steam system has been used to accelerate the oxidation kinetics while keeping the electrochemical conditions similar to those of the primary water in a pressurized water reactor. A special corrosion apparatus was built in cooperation with University of Manchester and Škoda JS for the purpose. The initiation is investigated using a Constant Extension Rate Test (CERT) with flat tapered specimens made from Type 316L austenitic stainless steel in a reducing vapour environment at 350 °C. Two different surface finishes were used: as-ground and as-polished. Constant extension rate tests with a test rate of 2×10-6 ms-1 were performed on 4 specimens - at room temperature and at an elevated temperature of 350 °C and as a more oxidizing environment was chosen R = 1/6, on the contrary as a more reducing environment was chosen R = 6, where parameter R represents the ratio between the oxygen partial pressure at the Ni/NiO transition and the oxygen partial pressure. Post-test evaluation using SEM was applied.en
dc.subject.translatedenvironmentally assisted crackingen
dc.subject.translatedstress corrosion crackingen
dc.subject.translatedhydrogenated steamen
dc.subject.translatedoxidationen
dc.type.statusPeer-revieweden
Vyskytuje se v kolekcích:Soutěžní přehlídka studentských a doktorských prací FST 2019
Soutěžní přehlídka studentských a doktorských prací FST 2019

Soubory připojené k záznamu:
Soubor Popis VelikostFormát 
Janousek.pdfPlný text709,35 kBAdobe PDFZobrazit/otevřít


Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam: http://hdl.handle.net/11025/34383

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.