| Název: | Intermetallics formation during hot dip galvanizing of high carbon steel |
| Autoři: | Gogola, Peter Gabalcová, Zuzana Suchánek, Henrik Kusý, Martin |
| Citace zdrojového dokumentu: | JIRKOVÁ, Hana ed.; JENÍČEK, Štepán ed. Proceedings PING 2019: modern trends in material engineering: 10.-13.09.2019, Pilsen. 1. vyd. Plzeň: University of West Bohemia, 2019, s. 124. ISBN 978-80-261-0879-5. |
| Datum vydání: | 2019 |
| Nakladatel: | University of West Bohemia |
| Typ dokumentu: | konferenční příspěvek conferenceObject |
| URI: | http://hdl.handle.net/11025/35278 |
| ISBN: | 978-80-261-0879-5 |
| Klíčová slova: | zinek;železo;intermetalické fáze;vysoce uhlíková ocel |
| Klíčová slova v dalším jazyce: | zinc;iron;intermetallic phases;high-carbon steel |
| Abstrakt v dalším jazyce: | From the moment of immersion, the reaction between molten zinc and solid steel starts forming intermetallic phases. This diffusion-controlled process is largely responsible for the final phase composition of zinc coatings. Several literature sources describe this phenomenon for interstitial free steels, but high-carbon steels are rarely being used as substrates. Therefore, in this work high-carbon steel substrates were used. Multiple samples were created by hot-dipping at various immersion temperatures ranging from 450 to 490 °C and times from 24 to 60 s to investigate mainly the morphology of the obtained intermetallic phase layers. Investigation was carried out mainly by SEM on 20 condition, where several hundred sites were investigated in total to achieve statistically relevant information. It was found that while increasing the immersion time influences mainly the thickness of individual intermetallic phase layers, the temperature influenced mainly their morphology. It was also observed that these results are significantly different compared to ones found in literature for interstitial free steels. |
| Práva: | © University of West Bohemia |
| Vyskytuje se v kolekcích: | Proceedings PING 2019: modern trends in material engineering Proceedings PING 2019: modern trends in material engineering |
Soubory připojené k záznamu:
| Soubor | Popis | Velikost | Formát | |
|---|---|---|---|---|
| Gogola.pdf | Plný text | 180,09 kB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/35278Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.