Název:	Comparison of conductive ribbons reliability during electrical current ageing
Autoři:	Hirman, Martin Navrátil, Jiří Steiner, František Hamáček, Aleš
Citace zdrojového dokumentu:	HIRMAN, M. NAVRÁTIL, J. STEINER, F. HAMÁČEK, A. Comparison of conductive ribbons reliability during electrical current ageing. In: Proceedings of the 2020 International Conference on Diagnostics in Electrical Engineering (Diagnostika) : CDEE 2020. Pilsen: University of West Bohemia in Pilsen, 2020. s. 82-86. ISBN 978-1-72815-879-2, ISSN 2464-7071.
Datum vydání:	2020
Nakladatel:	University of West Bohemia in Pilsen
Typ dokumentu:	konferenční příspěvek conferenceObject
URI:	2-s2.0-85094827650 http://hdl.handle.net/11025/42824
ISBN:	978-1-72815-879-2
ISSN:	2464-7071
Klíčová slova v dalším jazyce:	conductive ribbon;non-conductive adhesive;wearable electronics;smart textiles;accelerated ageing test
Abstrakt v dalším jazyce:	This paper deals with reliability of soldered / glued joints on electrically conductive textile ribbons during the electrical current ageing. The soldering was realized with tin-bismuth solder paste by hand soldering with hot air. The gluing was realized by UV curable non-conductive adhesive. The electrical resistance of soldered / glued joints on ribbons before, during and after electrical current load was satisfactory. The experiment provided proof that soldered / glued SMD chip components onto electrically conductive textile ribbons is possible and these joints are still usable under the electrical current load. It follows that tested types of joints on ribbon can be recommended for future use.
Práva:	Plný text je přístupný v rámci univerzity přihlášeným uživatelům. © University of West Bohemia in Pilsen
Vyskytuje se v kolekcích:	Konferenční příspěvky / Conference papers (RICE) Konferenční příspěvky / Conference Papers (KET) OBD

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.