Title:	The air flow around a milling cutter investigated experimentally by particle image velocimetry
Authors:	Kubíková, Tereza
Citation:	KUBÍKOVÁ, T. The air flow around a milling cutter investigated experimentally by particle image velocimetry. In AIP Conference Proceedings. Pilsen: American Institute of Physics, 2021. s. 030006-1-030006-8. ISBN: 978-0-7354-4067-8 , ISSN: 0094-243X
Issue Date:	2021
Publisher:	American Institute of Physics
Document type:	konferenční příspěvek ConferenceObject
URI:	2-s2.0-85102737408 http://hdl.handle.net/11025/45602
ISBN:	978-0-7354-4067-8
ISSN:	0094-243X
Keywords in different language:	Milling cutter;Particle Image Velocimetry;Correlation function
Abstract in different language:	The movement of air around a rotating milling cutter is investigated experimentally by using the optical non-intrusive method PIV (Particle Image Velocimetry). The milling cutter is located next to a flat surface simulating the processed material. The Flow is studied in three planes in axial × radial direction with phases 90°, 180° and 270° from the point closest to the flat desk. The PIV timing has been synchronized with the cutter rotation. We observed plumes governed by centrifugal force (as in Taylor-Couette flow) acting on the air teared with the rotating milling cutter. In average, the air flows along the milling cutter from its front end forming a large-scale vortex mostly apparent at higher velocity and at the plane opposite to the processed surface. At the 90°plane, the air is sucked towards the milling cutter, while at the 270°plane, the air is pushed away from it. Spatial correlation function shows a weak periodicity close to the cutter and widening of its shape with increasing distance from the milling cutter.
Rights:	© authors
Appears in Collections:	OBD

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.