Název:	Temperature and flow distribution of liquid metal fin in refractory of induction crucible furnaces
Autoři:	Lüdtke, Ulrich Löhlein, Andreas
Citace zdrojového dokumentu:	Proceeding of UIE 2021: XIX International UIE Congress on Evolution and New Trends in Electrothermal Processes. 1.-3.2021, Pilsen, Faculty of Electrical Engineering, University of West Bohemia, Czech Republic, 2021, p. 31-32.
Datum vydání:	2021
Nakladatel:	Faculty of Electrical Engineering, University of West Bohemia
Typ dokumentu:	konferenční příspěvek conferenceObject
URI:	http://hdl.handle.net/11025/45774
ISBN:	978-80-261-0930-3
Klíčová slova:	indukce;ohřívání;kelímek;teplota;průtok;kov;směrový stabilizátor;bezpečnost
Klíčová slova v dalším jazyce:	induction;heating;crucible;temperature;flow;metal;fin;safety
Abstrakt v dalším jazyce:	The melting process in induction crucible furnaces causes permanent erosion at the refractory. Apart from the fact that liquid metal may infiltrate the refractory, mechanical strains may also cause cracks. Liquid metal can enter the cracks and the metal can penetrate the refractory and reach the water cooled induction coil. If the induction coil is insufficiently cooled by water, it is possible that the hot liquid metal fin melts the copper coil. Should this happen, water would vaporize and produce hydrogen. An explosion with possibly fatal results would occur. Here, we numerically simulate the transient behavior of such a liquid metal fin in the refractory of induction crucible furnaces. We include the description of the boundary conditions, of the materials, of the arrangement, of the simplifications, and of the parameter variations used for the simulations. The results of the numerical simulations will be presented and finally some liquid metal fin characteristics will be interpreted.
Práva:	© IEEE
Vyskytuje se v kolekcích:	UIE 2021 UIE 2021

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.