Full metadata record
DC poleHodnotaJazyk
dc.contributor.authorAntoš, Jakub
dc.contributor.authorDuliškovič, Josef
dc.contributor.authorŠulcová, Petra
dc.contributor.authorLencová, Kateřina
dc.date.accessioned2022-01-31T11:00:31Z-
dc.date.available2022-01-31T11:00:31Z-
dc.date.issued2021
dc.identifier.citationANTOŠ, J. DULIŠKOVIČ, J. ŠULCOVÁ, P. LENCOVÁ, K. COHESION STRENGHT TEST OF SELECTED COMMERCIAL HVOF COATINGS. In METAL 2021. Ostrava: TANGER Ltd., Ostrava, 2021. s. 841-845. ISBN: 978-80-87294-99-4 , ISSN: 2694-9296cs
dc.identifier.isbn978-80-87294-99-4
dc.identifier.issn2694-9296
dc.identifier.urihttp://hdl.handle.net/11025/46698
dc.format5 s.cs
dc.format.mimetypeapplication/pdf
dc.language.isoenen
dc.publisherTANGER Ltd., Ostravacs
dc.relation.ispartofseriesMetal 2021en
dc.rights© Creative Commons Attribution Licenseen
dc.titleCohesion strenght test of selected commercial HVOF coatingsen
dc.typekonferenční příspěvekcs
dc.typeConferenceObjecten
dc.rights.accessopenAccessen
dc.type.versionpublishedVersionen
dc.description.abstract-translatedHigh velocity oxy-fuel spraying (HVOF) being one of thermal spraying techniques, is deployed in many commercial applications mostly for very hard wear and/or corrosion resistant coatings. Supersonic speed of the spraying jet combined with temperatures around 5500 K is utilized to spray most metals, metallic alloys, cermets and superalloys [1-3]. Typical HVOF coatings are compact, dense, with very low porosity, low to moderate oxidation level and high bonding strength to substrate [1]. Cermets and superalloys are standardly commercially applied HVOF materials, demanded for superb wear resistance, high hardness, abrasion and erosion resistance and overall great performance in high stress and/or high temperature environments. Proper testing methods are required to evaluate quality of deposited coatings and consequently choose coating with optimized properties for demanded application. There are many testing methods standardly and widely used for evaluating properties of thermally sprayed coatings – such as superficial indentation, micro and nanoindentation on cross section of the coating, tensile adhesion strength test, many tribological tests, etc. [1]. This article concerns modified TCT (tubular coating tensile test) for testing cohesion strength of the coatings with the use of common tensile test equipment. In this paper, specimen assembly, coating deposition, testing procedure and calculation of results is described. Cohesion strengths of five HVOF commercial coatings: Stellite 6, Hastelloy C 276, Cr3C2-25NiCr, WC 10Co4Cr and NiCrFeSiBC are evaluated.en
dc.subject.translatedThermal sprayingen
dc.subject.translatedHVOFen
dc.subject.translatedcohesion strengthen
dc.subject.translatedthermal spray coating testingen
dc.subject.translatedcermet coatingen
dc.subject.translatedtubular coating tensile testen
dc.subject.translatedTCT testen
dc.identifier.doi10.37904/metal.2021.4206
dc.type.statusPeer-revieweden
dc.identifier.obd43934564
dc.project.IDSGS-2019-008/Výzkum a vývoj pro inovace v oboru strojírenská technologie - technologie obrábění III.cs
Vyskytuje se v kolekcích:Konferenční příspěvky / Conference papers (KTO)
OBD

Soubory připojené k záznamu:
Soubor VelikostFormát 
HOUDKOVA_metal2021_antos_metal.pdf310,42 kBAdobe PDFZobrazit/otevřít
Zobrazit minimální záznam Zobrazit statistiky


Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam: http://hdl.handle.net/11025/46698

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.

hledání
navigace
  1. DSpace at University of West Bohemia
  2. Publikační činnost / Publications
  3. OBD