Název:	Influence of Corrosive Gases on Reliability of Conductive Joints
Autoři:	Hirman, Martin Říha, Marek Navrátil, Jiří Steiner, František
Citace zdrojového dokumentu:	HIRMAN, M. ŘÍHA, M. NAVRÁTIL, J. STEINER, F. Influence of Corrosive Gases on Reliability of Conductive Joints. In Proceedings of the 2022 International Conference on Diagnostics in Electrical Engineering (Diagnostika) : CDEE 2022. Pilsen: University of West Bohemia in Pilsen, 2022. s. nestránkováno. ISBN: 978-1-66548-082-6
Datum vydání:	2022
Nakladatel:	University of West Bohemia in Pilsen
Typ dokumentu:	konferenční příspěvek ConferenceObject
URI:	2-s2.0-85141412827 http://hdl.handle.net/11025/50530
ISBN:	978-1-66548-082-6
Klíčová slova v dalším jazyce:	flowing mixed gas corrosion test;conductive ribbon;knitted fabric;kapton;non-conductive adhesive;wearable electronics;e-textiles
Abstrakt v dalším jazyce:	This paper deals with the reliability under the flowing mixed gases corrosion test of interconnection techniques for the mounting surface mounted device (SMD) component. In the experiment, three types of substrates (conductive stretchable textile ribbon, knitted fabric, and flexible kapton substrate) and three contacting techniques (low-temperature soldering, isotropic electrically conductive adhesive bonding, and non-conductive adhesive bonding) were used. The experiment provided proof that soldered or non-conductive adhesive bonded samples are applicable even in a contaminated or industrial corrosive atmosphere, and the electrical resistance of joints on these samples remains acceptable. It follows e-textiles with soldered or non- =conductive adhesive bonded components can also be used in a contaminated or industrial atmosphere.
Práva:	© IEEE
Vyskytuje se v kolekcích:	OBD

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.