Title: | Výzkum plastových výrobků s ohledem na jejich technologii výroby |
Authors: | Habrman, Martin |
Issue Date: | 2023 |
Publisher: | Západočeská univerzita v Plzni |
Document type: | disertační práce |
URI: | http://hdl.handle.net/11025/54783 |
Keywords: | plasty;vstřikování;3d tisk;plastové vstřikovací vložky 3d tištěné metodou mjf z hp pa 12 gb;metodika |
Keywords in different language: | plastic;injection moulding;3d printing;mjf 3d printed plastic injection moulding inserts from hp pa 12 gb;methodology |
Abstract: | Cílem této disertační práce je prozkoumat vstřikování do plastových 3D tištěných vložek a pomoc s jejich uplatněním. I když je tato myšlenka relativně nová, již byla nalezena některá řešení. Kromě rešerše stávajících řešení a jejich možností je v této práci provedena rešerše plastů, vstřikování a 3D tisku. Na základě provedených rešerší a prozkoumání nejen současných řešení, ale i dílčích oblastí byly stanoveny upřesňující cíle disertační práce. Jeden z přínosů práce byl stanoven v použití doposud nepoužívané metody 3D tisku mající polotovar ve formě prášku - MJF. Pro zvolenou metodu byla na základě rešerší provedena příprava 3D tisku. Dalším krokem upřesňující cíle disertační práce je příprava vstřikování, a to především návrh, použití a zhodnocení modulární vstřikovací formy, která je dalším přínosem této práce. Dalším krokem této práce bylo prozkoumání vstřikování do plastových vložek 3D tištěných metodou MJF. K tomu bylo využito jak simulace, tak bylo použito i měření termokamerou, byly představeny varianty zkoušky zatékavosti, bylo provedeno měření 3D skenerem, k prozkoumání problematiky bylo také využito mikroskopického řezu a mnoho dalšího. Především zkoumání této problematiky včetně vyhotovení závěrů, možností testování atd. tvoří velké přínosy této práce. Na základě provedených rešerší, příprav a výzkumu byla sestavena metodika vstřikování do 3D tištěných plastových vložek metodou MJF. Metodika je výjimečnou, protože stávající řešení ji nenabízejí. Právě popsaná metodika je značným přínosem této práce, který pomůže přiblížit a rozšířit problematiku vstřikování do plastových vložek 3D tištěných metodou MJF |
Abstract in different language: | The aim of this dissertation is to investigate injection moulding into 3D printed plastic inserts and help with their application. Although this idea is relatively new, some solutions have already been found. In addition to a review of existing solutions and their possibilities, this dissertation includes a review of plastics, injection moulding and 3D printing. Based on these reviews and an investigation of not only current solutions but also particular areas, the refining objectives of the dissertation have been set. One of the contributions of this dissertation was the creation of a previously unused 3D printing method having a semi-finished product in the form of powder - Multi Jet Fusion (MJF). The method of 3D printing was prepared based on the conducted review. The next step of refining the dissertation objective is the preparation of the injection moulding. The design, use and evaluation of a new designed injection mould - a modular injection mould is another contribution of this thesis. The next step of this dissertation was to investigate the injection moulding of 3D printed plastic inserts using the MJF method. To do this, simulation and thermal camera measurements were used, variations of the flow test were presented, 3D scanning measurements were performed, microscopic sectioning was used to investigate the issue, and more. The investigation of these issues and the conclusions drawn, the testing methods etc. are major contributions of this work. Based on the research, preparation and investigation, a methodology for injection moulding of 3D printed plastic inserts using the MJF method was compiled. The methodology described is another major contribution of this thesis that will help to deal with and expand the issue of injection moulding into 3D printed plastic inserts using the MJF method. |
Rights: | Plný text práce je přístupný bez omezení |
Appears in Collections: | Disertační práce / Dissertations (KKS) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
DisP_Habrman_Martin_2023.pdf | Plný text práce | 14,01 MB | Adobe PDF | View/Open |
Vyjadreni skolitele_Vanek.pdf | Posudek vedoucího práce | 834,96 kB | Adobe PDF | View/Open |
Oponensky posudek_ Zetek.pdf | Posudek oponenta práce | 298,18 kB | Adobe PDF | View/Open |
Protokol_HABRMAN.pdf | Průběh obhajoby práce | 626,58 kB | Adobe PDF | View/Open |
Please use this identifier to cite or link to this item:
http://hdl.handle.net/11025/54783
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.