Full metadata record
DC poleHodnotaJazyk
dc.contributor.authorMuyskens, Sean Michael
dc.contributor.authorGoldstein, Robert Charles
dc.date.accessioned2021-11-10T10:30:58Z
dc.date.available2021-11-10T10:30:58Z
dc.date.issued2021
dc.identifier.citationProceeding of UIE 2021: XIX International UIE Congress on Evolution and New Trends in Electrothermal Processes. 1.-3.2021, Pilsen, Faculty of Electrical Engineering, University of West Bohemia, Czech Republic, 2021, p. 29-30.en
dc.identifier.isbn978-80-261-0930-3
dc.identifier.urihttp://hdl.handle.net/11025/45773
dc.format2 s.cs
dc.format.mimetypeapplication/pdf
dc.language.isoenen
dc.publisherFaculty of Electrical Engineering, University of West Bohemiaen
dc.rights© IEEEen
dc.subjectsvařování indukčních trubekcs
dc.subjectměkké magnetické kompozitycs
dc.subjectindukční ohřevcs
dc.subjectmagnetotermické vlastnosti materiálůcs
dc.titlePhysical Simulation of Soft Magnetic Composite Impeder Performance for use in Induction Tube Welding Systemsen
dc.typekonferenční příspěvekcs
dc.typeconferenceObjecten
dc.rights.accessopenAccessen
dc.type.versionpublishedVersionen
dc.description.abstract-translatedInduction tube welding is used for the continuous production of metallic tubes. These systems often utilize an internal magnetic flux controller (impeder) to improve process efficiency. Significant energy savings and increased productivity have been demonstrated both theoretically and practically when switching from the traditional ferrite impeder core, to one made of a soft magnetic composite (SMC) with high saturation flux density. In order to use SMCs in these systems it is important to balance the greater heat generated in these materials at higher fields with the cooling water available. A test stand was devised for physical simulation of SMC impeder performance for use in induction tube welding systems. Tests were run to determine the loading and cooling conditions that an impeder core made of SMCs could survive. Additionally, loss estimates based on the rise in temperature from the cooling water were compared with published loss data for the SMCs used. The goal of these tests was to create a design envelope in which impeder cores made of SMCs could survive and validate their use in induction tube welding systems.en
dc.subject.translatedinduction tube weldingen
dc.subject.translatedsoft magnetic compositesen
dc.subject.translatedinduction heatingen
dc.subject.translatedmagnetothermal properties of materialsen
dc.type.statusPeer-revieweden
Vyskytuje se v kolekcích:UIE 2021
UIE 2021

Soubory připojené k záznamu:
Soubor Popis VelikostFormát 
uvod_tiraz_obsah.pdfPlný text2,04 MBAdobe PDFZobrazit/otevřít
Proceeding_2021_final-29-30.pdfPlný text930,24 kBAdobe PDFZobrazit/otevřít
Zobrazit minimální záznam Zobrazit statistiky


Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam: http://hdl.handle.net/11025/45773

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.

hledání
navigace
  1. DSpace at University of West Bohemia
  2. Publikace ZČU / UWB Publications
  3. Sborníky ZČU / UWB Proceedings
  4. Proceeding of UIE 2021: XIX International UIE Congress on Evolution and New Trends in Electrothermal Processes
  5. UIE 2021